Accessories

Description

Pivoting Wall Bracket

For ergonomic reasons we always advice to install our EasyFix wall bracket between the wall and the reel. It allows 90° pivoting movement in both directions which means the reel will always align itself with the direction the operator is moving.

In order to avoid head injuries the EasyFix swivelling bracket should be mounted at minimal 2.5 meters height.

Pivoting Ceiling Bracket

A ceiling bracket is available for applications where the reel is suspended under a horizontal structure or under a work bench. This bracket rotates 340°.

Compact Work Bench

Depending on the space available, it can be useful to mount the AssemblyReel under a compact work bench. Due to its modular system, these benches are available to accommodate one up to five reel units. This can be very interesting for Repair Areas where several air tools are used at the same time.

CompactWorkBench

Ergonomic Tool Swivels

Faithful to our mission to improve ergonomics, several tool swivels are available to make handling the air tool easier. These can rotate 360 degrees in every plane and improve tool manoeuvrability, minimizes operator fatigue and extends hose life.

Power Cords

The AssemblyReel is equipped with a universal IEC-C13 power connector, commonly used on computers, printers, monitors, …  and available in most countries. Each IEC power cord is furnished with one of following plugs:

NEMA 5-15 (USA)
CEE 7/7 (EUR)
BS 1363 (UK)

power-chords

RedFlex Air Hose

RedFlex hoses are available uit to 20 meters of diameter 3/8’’ and 15 meters of diameter 1/2’’, fourished with appropreate NPT or BSP fittings. Other lengths or other fittings are available on request.

redflex-air-hose

Wrench type Tool Holder (fix model)

Several tool holders are available for wrench type of air tools are available in different sizes. These can be equipped with a proximity sensor that can be connected to the micro receptacle at the back of the AssemblyReel. The automatic retraction will start the moment the operator puts the air tool back in the tool holder. This accessory can be interesting in applications using short lengths of hose or in combination with compact work benches configurations (see above).

wrench-type-toolholder

Wrench type Tool Holder (adjustable model)

Several tool holders are available for wrench type of air tools are available in different sizes. These can be equipped with a proximity sensor that can be connected to the micro receptacle at the back of the AssemblyReel. The automatic retraction will start the moment the operator puts the air tool back in the tool holder. This accessory can be interesting in applications using short lengths of hose or in combination with compact work benches configurations (see above).

Gun type Tool Holder

A tool holder for gun type air tools is also available. This holder can be equipped with an integrated switch that can be connected to the M12 micro receptacle at the back of the AssemblyReel. The automatic retraction will start the moment the operator puts the tool back in the tool holder. This can be interesting when the AssemblyReel is combined with compact work benches (see above).

Alternative DC Tool Cables

A wind range of alternative DC tool cables is available for most common installations. Our HighFlex tool cables have been designed with improved bending properties which are very important when used intensively on a reeling device. Benefits of our HighFlex tool cable assemblies are:

  • up to three times higher life expectancy than original tool cables
  • less expensive than original tool cables
  • optimized round cable design, ultra-light and very flexible
  • available in any desired length
  • improved bending protector
  • inexpensive to repair
  • readily available for most common DC tool installations:
    • Apex – Cleco – Cooper Tools
    • Atlas Copco
    • Bosch Rexroth
    • Desoutter – Georges Renault
    • Ingersoll-Rand
    • Stanley
AlternativeDcToolCables
HighFlex Tool Cable Diameter Cable Configuration Tool Connector Cable Length
76011 ACT 10005 10.5 mm Atlas Copco DS/S Straight 5 m
76011 ACT 10007 10.5 mm Atlas Copco DS/S Straight 7 m
76011 ACT 10010 10.5 mm Atlas Copco DS/S Straight 10 m
76011 ACT 10015 10.5 mm Atlas Copco DS/S Straight 15 m
76021 ACT 10005 10.5 mm Atlas Copco ST Straight 5 m
76021 ACT 10007 10.5 mm Atlas Copco ST Straight 7 m
76021 ACT 10005 10.5 mm Atlas Copco ST Straight 10 m
76021 ACT 10005 10.5 mm Atlas Copco ST Straight 15 m
76011 AMT 10005 10.5 mm AMT HCX/PCX Straight 5 m
76011 AMT 10007 10.5 mm AMT HCX/PCX Straight 5 m
76011 AMT 10010 10.5 mm AMT HCX/PCX Straight 10 m
76011 AMT 10015 10.5 mm AMT HCX/PCX Straight 15 m
76011 STG 10005 10.5 mm Stanley GSE Straight 5 m
76011 STG 10007 10.5 mm Stanley GSE Straight 7 m
76011 STG 10010 10.5 mm Stanley GSE Straight 10 m
76011 STG 10015 10.5 mm Stanley GSE Straight 15 m
76021 STG 10005 10.5 mm Stanley E12/E Straight 5 m
76021 STG 10007 10.5 mm Stanley E12/E Straight 7 m
76021 STG 10010 10.5 mm Stanley E12/E Straight 10 m
76021 STG 10015 10.5 mm Stanley E12/E Straight 15 m
76011 IRT 10005 10.5 mm Ingersoll-Rand QE Straight 5 m
76011 IRT 10007 10.5 mm Ingersoll-Rand QE Straight 7 m
76011 IRT 10010 10.5 mm Ingersoll-Rand QE Straight 10 m
76011 IRT 10015 10.5 mm Ingersoll-Rand QE Straight 15 m
76011 BRT 10005 10.5 mm Bosch Rexroth SE200 Straight 5 m
76011 BRT 10007 10.5 mm Bosch Rexroth SE200 Straight 7 m
76011 BRT 10010 10.5 mm Bosch Rexroth SE200 Straight 10 m
76011 BRT 10015 10.5 mm Bosch Rexroth SE200 Straight 15 m
76011 GRT 10015 10.5 mm Georges Renault ER Straight 15 m
76021 GRT 10015 10.5 mm Georges Renault EM Straight 15 m
76031 GRT 10015 10.5 mm Georges Renault EME Straight 15 m
76011 DST 10005 10.5 mm Desoutter ER Straight 5 m
76011 DST 10007 10.5 mm Desoutter ER Straight 7 m
76011 DST 10010 10.5 mm Desoutter ER Straight 10 m
76011 DST 10015 10.5 mm Desoutter ER Straight 15 m
76021 DST 10005 10.5 mm Desoutter ECA Straight 5 m
76021 DST 10007 10.5 mm Desoutter ECA Straight 7 m
76021 DST 10010 10.5 mm Desoutter ECA Straight 10 m
76021 DST 10015 10.5 mm Desoutter ECA Straight 15 m
76011 ATG 10005 10.5 mm APEX Cleco Straight 5 m
76011 ATG 10007 10.5 mm APEX Cleco Straight 7 m
76011 ATG 10010 10.5 mm APEX Cleco Straight 10 m
76011 ATG 10015 10.5 mm APEX Cleco Straight 15 m